Ultra Thin Din Rail Type PSU MDR Series 60W 24V 12V 48V Single Group Switching Power Supply
1)High Efficiency, High Reliability, Low Cost
2)AC Input Range: 85~264VAC
3)100% Full Load Burn-In Test
4)Protections: Short Circuit / Over Load/Over Voltage
5)LED Indicator For Power On
6)Cooling By Free Air Convection
7)Approvals: CE RoHS
8)2 Years Warranty
Features:
1. Universal AC input/ Full range
2. Installed on DIN rail TS35/ 7.5 OR 15
3. Protection: short circuit/ over-load/ over-voltage
4. No load power consumption <0.75W
5. LED indicator for power on
6. DC OK signal output (10W)
7. DC OK relay contact (40W&60W)
8. Cooling by free air condition
9. 100% full load burn-in
10. 2 years warranty
Product Parameters
| MODEL |
MDR-60-5 |
MDR-60-12 |
MDR-60-24 |
MDR-60-48 |
| DC Voltage |
5V |
12V |
24V |
48V |
| Current range |
0 ~ 10A |
0 ~ 5A |
0 ~2.5A |
0 ~ 1.25A |
| Rated power |
50W |
60W |
60W |
60W |
| Wave and noise |
80mVp-p |
120mVp-p |
150mVp-p |
200mVp-p |
| Inlet wire stability |
±1% |
±1% |
±1% |
±1% |
| Load stability |
±1.5% |
±1% |
±1% |
±1% |
| Efficiency |
78% |
80% |
82% |
84% |
| Adjustable range for DC voltage |
±2% |
±1% |
±1% |
±1% |
| Setup, rise hold up time |
500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load |
| Input Voltage range |
85 ~ 264VAC 120 ~ 370VDC 47-63Hz |
| Impact current |
Cold start current 30A/115VAC 60A/230VAC |
| Overload |
105%~150% cut off the output, automatic recovery |
| Over voltage |
120%-140% shut down O/P voltage, re-power on to recover |
| Working temperature |
-10ºC ~ +50ºC |
| Withstand voltage |
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| Isolation Resistance |
I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC |
| DIMENSION |
40*90*100mm (W*H*D) |
| PACKING |
0.35Kg; 60pcs/21Kg/45.5*32.5*23cm |
Company Profile
1. How we control the quality?
Aging test for 12 hours, after then we put them into the market.
2. Can we accept samples customized?
No problem for samples order, and welcome your testing before your big order.
3. What about the production capacity?
4. days for samples order under 100pcs, 7-15 days for general order under 10000pcs.
4. OEM and ODM are available? Yes, we accept
customized products
5. Will the delivery time be long for a big order?
No, we have two special parts in production line, one for samples orders, another for big orders, so we can control the delivery time as we promise in the contract.
6. What is our warranty service?
For all products we sell have 2 year warranty.
){kind=link}