EDR-120-12 120W 12V DC 10A Single Output Switching Power Supply DIN Rail SMPS

• Customization: Available
• Output Type: Single
• Warranty: 2 Years
• Model NO.: EDR-120W-12V
• Input Voltage: 110-220V
• Connection Mode: Series Switching Power Supply
• Starting Mode: Self-excited Switching Power Supply
• Voltage Regulating Mode: Frequency Modulation Type
• Power Supplying System: Terminal Power Distribution Equipment
• Energy Transmission: One-way Transmission
• Modulation System: PWM
• Certification: CE, RoHS
• Brand: Chux
• Output Voltage: 12V
• OEM: Yes
• Size: 40*125.2*113.5mm (W*H*D)
• Weight: 0.65kg
• Walt: 120W
• Transport Package: Normally Export Packing
• Specification: CE. ROHS
• Trademark: CHUX
• Origin: China
• HS Code: 8504401990
• Production Capacity: 100000PCS /Year
• Package Size: 15.00cm * 10.00cm * 8.00cm
• Package Gross Weight: 0.650kg

Product Description

EDR-120-12 120W 12V DC 10A Single Output Switching Power Supply DIN Rail SMPS  

1)High Efficiency, High Reliability, Low Cost
2)AC Input Range: 85~264VAC
3)100% Full Load Burn-In Test
4)Protections: Short Circuit / Over Load/Over Voltage
5)LED Indicator For Power On
6)Cooling By Free Air Convection
7)Approvals: CE RoHS
8)2 Years Warranty

Features: 


1. Universal AC input/ Full range
2. Installed on DIN rail TS35/ 7.5 OR 15
3. Protection: short circuit/ over-load/  over-voltage
4. No load power consumption <0.75W
5. LED indicator for power on
6. DC OK signal output (10W)
7. DC OK relay contact (40W&60W)
8. Cooling by free air condition
9. 100% full load burn-in
10. 2 years warranty

Product Parameters

 
 

MODEL		EDR-120-12	EDR-120-24	EDR-120-48
OUTPUT	DC VOLTAGE	12V	24V	48V
	RATED CURRENT	10A	5A	2.5A
	CURRENT RANGE	0 ~ 10A	0 ~ 5A	0 ~ 2.5A
	RATED POWER	120W	120W	120W
	RIPPLE & NOISE (max.) Note.2	100mVp-p	120mVp-p	150mVp-p
	VOLTAGE ADJ. RANGE	12 ~ 14V	24 ~ 28V	48 ~ 55V
	VOLTAGE TOLERANCE Note.3	±2.0%	±1.0%	±1.0%
	LINE REGULATION	±0.5%	±0.5%	±0.5%
	LOAD REGULATION	±1.0%	±1.0%	±1.0%
	SETUP, RISE TIME	1200ms, 60ms/230VAC 2500ms, 60ms/115VAC at full load
	HOLD UP TIME (Typ.)	16ms/230VAC 10ms/115VAC at full load
INPUT	VOLTAGE RANGE Note.6	90 ~ 264VAC 127 ~ 370VDC	[DC input operation possible by connecting AC/L(+), AC/N(-)]
	FREQUENCY RANGE	47 ~ 63Hz
	EFFICIENCY (Typ.)	85%	87.5%	88.5%
	AC CURRENT (Typ.)	2.25A/115VAC 1.3A/230VAC
	INRUSH CURRENT (Typ.)	20A/115VAC 35A/230VAC
	LEAKAGE CURRENT	<1mA / 240VAC
PROTECTION	OVERLOAD	105 ~ 130% rated output power
		Protection type : Constant current limiting, recovers automatically after fault condition is removed
	OVER VOLTAGE	14 ~ 17V	29 ~ 33V	56 ~ 65V
		Protection type : Shut down o/p voltage, re-power on to recover
	OVER TEMPERATURE	Shut down o/p voltage, re-power on to recover
ENVIRONMENT	WORKING TEMP.	-20 ~ +60ºC (Refer to "Derating Curve")
	WORKING HUMIDITY	20 ~ 95% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +85ºC, 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/ºC (0 ~ 50ºC)
	VIBRATION	Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
SAFETY & EMC (Note 4)	SAFETY STANDARDS	UL508, TUV EN62368-1, EAC TP TC 004, BSMI CNS14336-1 approved;(meet EN60204-1)
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25ºC/ 70% RH
	EMC EMISSION	Compliance to EN55032 (CISPR32) Class A, EN61000-3-2,-3, EAC TP TC 020, CNS13438 Class A
	EMC IMMUNITY	Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2), heavy industry level, criteria A, EAC TP TC 020
OTHERS	MTBF	474.6K hrs min. MIL-HDBK-217F (25ºC)
	DIMENSION	40*125.2*113.5mm (W*H*D)
	PACKING	0.6Kg; 20pcs/13Kg/1.16CUFT
NOTE	All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. Tolerance : includes set up tolerance, line regulation and load regulation. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. lnstallation clearances : 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with full power. ln case the adjacent device is a heat source, 15mm clearance is recommended. Derating may be needed under low input voltage. Please check the derating curve for more details. The ambient temperature derating of 3.5ºC/1000m with fanless models and of 5ºC/1000m with fan models for operating altitude higher than 2000m(6500ft}.

 

 









 

Company Profile

 

1. How we control the quality?

Aging test for 12 hours, after then we put them into the market.
 

2. Can we accept samples customized?

No problem for samples order, and welcome your testing before your big order.
 

3. What about the production capacity?

4. days for samples order under 100pcs, 7-15 days for general order under 10000pcs.
 

4. OEM and ODM are available? Yes, we accept

customized products
 

5. Will the delivery time be long for a big order?

No, we have two special parts in production line, one for samples orders, another for big orders, so we can control the delivery time as we promise in the contract.
 

6. What is our warranty service?

For all products we sell have 2 year warranty.